Lsm303d

Sharplace Module -10DOF LSM303D L3GD20 BMP180, Accelerometre Module
Sharplace
EUR 8,99
Beschreibung: - 10DOF Accelerometer, Kompass und Höhenmesser (L3GD20, LSM303D und BMP180) - Abmessungen: 33 mm × 23 mm - Gewicht ohne Sockelpins: 1 g - Betriebsspannung: 3,3 V bis 5 V - Versorgungsstrom: 8 mASpezifikation: - Ausgabeformat (I2C / SPI): - Gyro: ein 16-Bit-Messwert pro Achse - Beschleunigungssensor: ein 16-Bit-Messwert pro Achse - Magnetometer: ein 16-Bit-Messwert pro Achse - Barometer: 24-Bit-Druckwert (I2C nur) - Empfindlichkeitsbereich: - Gyro: ± 245, ± 500 oder ± 2000 ° / s - Beschleunigungssensor: ± 2, ± 4, ± 6, ± 8 oder ± 16 g - Magnetometer: ± 2, ± 4, ± 8 oder ± 12 Gauss - Barometer: 300hPato 1110hPaPaket beinhaltet: 1 x 10DOF Vorstand
MEGA 2560 AND THE LSM303D ACCELEROMETER AND MAGNETOMETER (ARDUINO Book 7) (English Edition)

In this ebook we are going to find interesting projects made with the Mega 2560 board and the LSM303D sensor, a high-precision 3D accelerometer and magnetometer. These three projects are: a Compass that shows us the north pole in our PC, a system of navigation in which we use a servo that is oriented to the north pole and an inclinometer that measures us the angles of inclination XZ and YZ.
UIOTEC New 10DOF L3GD20 LSM303D BMP180 Gyro Accelerometer Compass Altimeter For Arduino
UIOTEC
EUR 19,64
Dimensions: 22 mm ¡Á 17 mm Operating voltage: 2.5 V to 5.5 V Supply current: 8mA Output format (I2C/SPI): Gyro: one 16-bit reading per axis Accelerometer: one 16-bit reading per axis Magnetometer: one 16-bit reading per axis Barometer: 24-bit pressure reading (I2C only)
MICROROBOT GENIUS ARDUINO UNO + ACCELEROMETER (English Edition)

This project is version 2 of my previous publication "Microrobot Genius Arduino UNO + App Inventor 2". Unlike my previous work, my improvements are basically the following: using the Accelerometer and Magnetometer LSM303D, this way I can monitor in the application of my cell in both angle of inclination and the compass, which is calibrated towards the North Pole; That is, the North Pole is at 90 degrees.
POLOLU-2127 LSM303D 3D Compass and Accelerometer Carrier with Voltage Regula /uk
POLOLU
EUR 10,15
POLOLU-2127 LSM303D 3D Compass and Accelerometer Carrier with Voltage Regulator The LSM303D combines a digital 3-axis accelerometer and 3-axis magnetometer into a single package that is ideal for making a tilt-compensated compass. The six independent readings, whose sensitivities can be set in the ranges of AND plusmn2 to AND plusmn16 AND g and AND plusmn2 to AND plusmn12 AND gauss, are available through I AND sup2C and SPI interfaces. This LSM303 carrier board includes a 3.3 AND V voltage regulator and integrated level shifters that allows operation from 2.5 to 5.5 AND V, and the 0.1 AND Prime pin spacing makes it easy to use with standard solderless breadboards and 0.1 AND Prime perfboards. Specifications Dimensions 0.4 AND Prime AND AND times AND 0.9 AND Prime AND AND times AND 0.1 AND Prime (10 AND AND times AND 23 AND AND times AND 3 AND mm) Weight without header pins 0.6 AND g (0.02 AND oz) Operating voltage 2.5 AND V to 5.5 AND V Supply current 5 AND mA Output format (I AND sup2C/SPI) Accelerometer one 16-bit reading per axis Magnetometer one 16-bit reading per axis Sensitivity range (configurable) Accelerometer AND plusmn2, AND plusmn4, AND plusmn6, AND plusmn8, or AND plusmn16 AND g Magnetometer AND plusmn2, AND plusmn4, AND plusmn8, or AND plusmn12 gauss AND
Pololu 3D Compass Accelerometer Sensor Carrier 3-Axis with 3.3V Voltage Regulator Sensitivity Range ±2 to ±16 g and ±2 to ±12 Gauss with LSM303D with Digital I2C SPI Interface 2127
Pololu
EUR 9,55
Overview The LSM303D combines a digital 3-axis accelerometer and 3-axis magnetometer into a single package that is ideal for making a tilt-compensated compass. The six independent readings, whose sensitivities can be set in the ranges of ±2 to ±16?g and ±2 to ±12?gauss, are available through I?C and SPI interfaces. This LSM303 carrier board includes a 3.3?V voltage regulator and integrated level shifters that allows operation from 2.5 to 5.5?V, and the 0.1" pin spacing makes it easy to use with standard solderless breadboards and 0.1" perfboards. Specifications Dimensions: 0.4″ × 0.9″ × 0.1″ (10 × 23 × 3 mm) Weight without header pins: 0.6 g (0.02 oz) Operating voltage: 2.5 V to 5.5 V Supply current: 5 mA Output format (I²C/SPI): Accelerometer: one 16-bit reading per axis Magnetometer: one 16-bit reading per axis Sensitivity range (configurable): Accelerometer: ±2, ±4, ±6, ±8, or ±16 g Magnetometer: ±2, ±4, ±8, or ±12 gauss Package content 1xPololu LSM303D 3D Compass and Accelerometer Carrier with Voltage Regulator
MagiDeal 10DOF Lsm303d L3gd20 BMP180 Breakout-Board Beschleunigungsmesser Kompass Höhenmesser Modul
MagiDeal
EUR 10,99
Beschreibung: 10DOF Accelerometer, Kompass und Höhenmesser (L3GD20, LSM303D und BMP180) Abmessungen: 33 mm × 23 mm Gewicht ohne Sockelpins: 1 g Betriebsspannung: 3,3 V bis 5 V Versorgungsstrom: 8 mA Spezifikation: Ausgabeformat (I2C / SPI): Gyro: ein 16-Bit-Messwert pro Achse Beschleunigungssensor: ein 16-Bit-Messwert pro Achse Magnetometer: ein 16-Bit-Messwert pro Achse Barometer: 24-Bit-Druckwert (I2C nur) Empfindlichkeitsbereich: Gyro: ± 245, ± 500 oder ± 2000 ° / s Beschleunigungssensor: ± 2, ± 4, ± 6, ± 8 oder ± 16 g Magnetometer: ± 2, ± 4, ± 8 oder ± 12 Gauss Barometer: 300hPato 1110hPa Paket beinhaltet: 1 x 10DOF Vorstand
SEEED-101020081 Sensor position 5VDC IC LSM303D Kit module, wire SEEED STUDIO
SEEDSTUDIO
EUR 40,65
Sensor position 5VDC IC LSM303D Kit module, wire jumpers Manufacturer SEEED STUDIO Type of sensor position Supply voltage 5V DC Integrated circuit LSM303D Application ARDUINO Number of channels 6 Series Grove Accelerometer measuring range ±2, ±4, ±8, ±16g Kind of sensor accelerometer, magnetometer Magnetometer measuring range ±2, ±4, ±8, ±12Gs Information Product is not a working device, but only component Mounting screw Interface Grove Interface (4-wire) I2C SPI Kit contents module wire jumpers Additional information Gross weight 0.03 kg
9 Axis IMU L3GD20 LSM303D Modul 9DOF Compass Acceleration Gyroskop Sensor Modul für Arduino
YGHA04516
EUR 8,03
100% brand new and high qualityMaterial: Electrical componentsColor: See pictures9DOF IMU Breakout9 can capture nine different types of motion or orientation of the 3-axis accelerometer to obtain the relevant data magnetic orientation and angular velocity that is three-axis gyroscope + triaxial accelerometer three-axis magnetic field +Power supply: 3-5v (internal low dropout regulator)Communication: standard IIC / SPI communication protocolGyroscope range: ± 250 500 1000 2000 ° / sAcceleration Range: ± 2 ± 4 ± 8 ± 16gField range:: ± 1.3 ± 8.1 gauss magnetic field2.54mm pitchSize: See the pictureNo retail packageQuantity:1Pc  Note: Due to the difference between different monitors, the picture may not reflect  the actual color of the item. Thank you!!  Package Included: 1  x 9DOF IMU Breakout 9 Pressure Attitude Axis Digital Gyroscope Sensor
AltIMU-10 v4 Gyro, Accelerometer, Compass, and Altimeter (L3GD20H, LSM303D, and LPS25H Carrier)
Pololu
EUR 35,25
The Pololu altimu-10 V4 is Jahr Inertial Measurement Unit (IMU) and Altimeter That Merkmale The Same l3gd20h Gyro and LSM303D Accelerometer and Magnetometer AS THE Minimu-9 V3, and ADDS Jahr lps25h Digital Barometer. Jahr I² C Schnittstelle accesses Ten Independent Pressure, Rotation, Acceleration, and magnetic Measurements That CAN BE USED TO CALCULATE The Sensors Höhe and absolute Ausrichtung. The Board Operates from 2,5 to 5,5 V and has a 0,1 Kiefer Spacing. The Pololu altimu-10 V4 is a compact (1.0 × 0,5) Board That und STS lps25h Digital Barometer, l3gd20h 3-axis Gyroskop, and LSM303D 3-axis Accelerometer and 3-axis Magnetometer to Form Jahr Inertial Measurement Unit (IMU) and Altimeter; we therefore Recommend Careful Reading of the lps25h Datasheet (1MB PDF), l3gd20h Datasheet (3MB PDF), and LSM303D Datasheet (1MB PDF) Before using this product. These Sensors are great ICS, Ziel Their Small Pakete Make Them difficult for the typical Student Gold Hobbyist to use. They auch Operate at voltages Below 3,6 V, which can make Interfacing difficult for Microcontrollers Operating at 5 V The altimu-10 V4 Adressen These aus by aufzuwärmen denken Electronics, INCLUDING hat Spannung regulator and a level-shifting Schaltung WHILE Keeping The; Gesamthöhe: Size AS Compact AS möglich. The Board Ships Fully POPULATED with its SMD Components, INCLUDING THE l3gd20h, LSM303D, and lps25h, wie abgebildet in The Product Picture. The altimu-10 V4 Merkmale hat NEEWER Pressure Sensor Than ITS predecessor, The altimu-10 V3, Enabling Pressure And Höhe Measurements with Higher Genauigkeit and Lower Noise, but the Two Boards are otherwise Erwachsene Multisporthandschuhe Identical. Compared to the original altimu-10, The V4 Version Produktangebote A Number of Improvements arising from the use of NEEWER MEMS Sensors, INCLUDING A wider maximal Magnetic Sensing Range and Better gyroscopic Genauigkeit and stability. This Version auch ADDS hat Kiefer for Changing Wickelunterlage The Sensor Slave Adressen, ALLOWING Two altimus to be on the same I² C Bus. The altimu-10 V4 is
POLOLU-2127 Sensor position sensor 2.5÷5.5VDC IC LSM303D POLOLU
POLOLU
EUR 14,29
Sensor position sensor 2.5÷5.5VDC IC LSM303D ±2,±4,±8,±12Gs Manufacturer POLOLU Sensor type position sensor Supply voltage 2.5...5.5V DC Integrated circuit LSM303D Accelerometer measuring range ±2, ±4, ±6, ±8, ±16g Magnetometer measuring range ±2, ±4, ±8, ±12Gs Information Product is not a working device, but only component Interface I2C SPI Additional information Gross weight 3.09 g MPN POLOLU-2127
10DOF L3GD20 LSM303D BMP180 Gyro Beschleunigungsmesser Kompass Altimeter für Arduino GY89 GY-89
YGHA07771
EUR 15,99
   100% brand new and high qualityDimensions: 22 mm × 17 mmOperating voltage: 2.5 V to 5.5 VSupply current: 8mAOutput format (I2C/SPI):Gyro: one 16-bit reading per axisAccelerometer: one 16-bit reading per axisMagnetometer: one 16-bit reading per axisBarometer: 24-bit pressure reading (I2C only)Gyro: ±245, ±500, or ±2000°/sAccelerometer: ±2, ±4, ±6, ±8, or ±16 gMagnetometer: ±2, ±4, ±8, or ±12 gaussBarometer: 300hPato 1110hPaPackage Included:1 x 10DOF L3GD20 LSM303D BMP180 Gyro Accelerometer Compass Altimeter For Arduino     
Almencla 10DOF LSM303D L3GD20 BMP180 Breakout Board Beschleunigungsmesser
Almencla
EUR 7,99
Beschreibung: - 10DOF Accelerometer, Kompass und Höhenmesser (L3GD20, LSM303D und BMP180) - Abmessungen: 33 mm × 23 mm - Gewicht ohne Sockelpins: 1 g - Betriebsspannung: 3,3 V bis 5 V - Versorgungsstrom: 8 mASpezifikation: - Ausgabeformat (I2C / SPI): - Gyro: ein 16-Bit-Messwert pro Achse - Beschleunigungssensor: ein 16-Bit-Messwert pro Achse - Magnetometer: ein 16-Bit-Messwert pro Achse - Barometer: 24-Bit-Druckwert (I2C nur) - Empfindlichkeitsbereich: - Gyro: ± 245, ± 500 oder ± 2000 ° / s - Beschleunigungssensor: ± 2, ± 4, ± 6, ± 8 oder ± 16 g - Magnetometer: ± 2, ± 4, ± 8 oder ± 12 Gauss - Barometer: 300hPato 1110hPaPaket beinhaltet: 1 x 10DOF Vorstand
Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller mit Sicherheitsschalter Summer Splitter Expand Modul für DIY RC Drone - Grau & Schwarz
Harlls
EUR 60,51
Descriptions:The board integrates with PX4FMU+PX4IO.Pixhawk is with new 32 bit chip and sensor technology.Provide redundant power input and fault transfer function.Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control;Specifications:Material: plastic and electronic componentSize: 110x145x18mmColor: gray & blackPackage included:1 x 2.4.8 Pixhawk Main Control 1 x Safety switch 1 x Flight control shell1 x Buzzer1 x 6pin to 6pin line 1 x 4Pin to 4Pin line1 x 3pin DuPont line Notes:1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.2.Due to the manual measurement and different measurement methods, please allow 1-3cm deviation.Thanks!
Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller mit Sicherheitsschalter Summer Splitter Expand Modul für DIY RC Drone - Grau & Schwarz
Oyamihin
EUR 66,99
Descriptions:The board integrates with PX4FMU+PX4IO.Pixhawk is with new 32 bit chip and sensor technology.Provide redundant power input and fault transfer function.Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control;Specifications:Material: plastic and electronic componentSize: 110x145x18mmColor: gray & blackPackage included:1 x 2.4.8 Pixhawk Main Control 1 x Safety switch 1 x Flight control shell1 x Buzzer1 x 6pin to 6pin line 1 x 4Pin to 4Pin line1 x 3pin DuPont line Notes:1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.2.Due to the manual measurement and different measurement methods, please allow 1-3cm deviation.Thanks!
Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller mit Sicherheitsschalter Summer Splitter Expand Modul für DIY RC Drone - Grau & Schwarz
Panamami
EUR 59,41
Descriptions:The board integrates with PX4FMU+PX4IO.Pixhawk is with new 32 bit chip and sensor technology.Provide redundant power input and fault transfer function.Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control;Specifications:Material: plastic and electronic componentSize: 110x145x18mmColor: gray & blackPackage included:1 x 2.4.8 Pixhawk Main Control 1 x Safety switch 1 x Flight control shell1 x Buzzer1 x 6pin to 6pin line 1 x 4Pin to 4Pin line1 x 3pin DuPont line Notes:1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.2.Due to the manual measurement and different measurement methods, please allow 1-3cm deviation.Thanks!
KNOSSOS PX4 915 500MW Drone Flight Controller with OSD Safety Switch Buzzer - Black
KNOSSOS
EUR 153,49
Specifications:Name:Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight ControllerSize: 15cm x 18cm x 15cmMicroprocessor1.32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit2. frequency: 168MHZ, 256K RAM3.32 STM32F103 backup coprocessorSensor1.L3GD20 3-axis digital gyroscope 162.LSM303D 3-axis accelerometer 14/Magnetometer3.MPU6000 6-axis accelerometer/magnetometer4.MS5611 precision barometerInterface1 .5 high voltage compatible UART 1, 2 with hardware flow control2. 2 CAN3.Spektrum DSM/DSM2/DSM-X satellite receiver compatible input4.Futaba SBUS compatible inputs and outputs5.PPM Signal Input6.RSSI (PWM or voltage) Input7.I2C8.SPI9.3.3 and 6.6VADC input10. External MICRO USB InterfacePackage information:Package size:200x250x230mm/8x10x9.2inPackage weight:310g/10.85ozPackage Included:1xPixhawk 2.4.8 32bit ARM Flight Controller 1xSafety button and buzzer ( 2 kinds of design send at random)1xRGB 1x8G TF card (IO firmware has written) 1xNeo-M8N Gps Module 1xBlack Gps Holder 1xPower Module ( yellow and black color XT60 connector PM send at random)1xMinim OSD w/ shell ( 2 kind of OSD cable send at random)1xI2C Splitter Expand Module 1xPPM Module w/ shell 1x433/915 MHZ telemetry ( send as your choice) 1x6pin turn 6pin cable 1x4pin turn 4pin cable 1x3pin DuPont line